Part # MAX9508 datasheet

Part Manufacturer: Maxim


Part Description: MAX9508 DS

Part Details:

19-0531; Rev 1; 8/06 EVALUATION KIT AVAILABLE CVBS/S-Video Filter Amplifier with SmartSleep and Bidirectional Video Support MAX9508 General Description Features The MAX9508 video filter amplifier with SmartSleep and o SmartSleep Feature Detects Input Signal and bidirectional video support is ideal for set-top boxes Output Load Status to Reduce Power (STBs), portable DVD players, and portable media Consumption players (PMPs). The inputs can be directly connectedto the digital-to-analog converter (DAC) outputs. The o Triple Standard-Definition Video Reconstruction reconstruction filter removes high-frequency signals Filters with 6.75MHz Passband above 6.75MHz. The amplifiers have 6dB of gain, and o Luma, Chroma, and Composite Inputs the outputs can be DC-coupled to a load of 75,which is equivalent to two video loads, or it can be o Luma, Chroma, and Two Composite Outputs AC-coupled to a load of 150. o Integrated Support for a Bidirectional Composite The SmartSleep circuitry intelligently reduces power Video Signal consumption based on the presence of the input signal o and the output loads. When the MAX9508 does not Supports Two Video Loads at Each Output detect the presence of sync on the input video signal, (DC-Coupled) the supply current is reduced to less than 7µA. The o 2.7V to 3.6V Single-Supply Operation device only enables a video amplifier when there is anactive video input signal and an attached load. The Ordering Information video amplifier remains on while a load is connected. If PART PIN-PACKAGE PKG CODE TOP MARK the load is disconnected, the video amplifier is turned off. The MAX9508 contains three reconstruction filters, four 16 TQFN-EP** MAX9508ATE+ T1633-4 AEM video amplifiers, and a pulldown switch at one of the (3mm x 3mm) two CVBS outputs. The MAX9508 has the ability to con- MAX9508AEE+* 16 QSOP E16-4 -- trol the bidirectional video signals at the CVBS video Note: All devices are specified over the -40°C to +125°C operat- connections without the need for separate switches or

Please click the following link to download the datasheet:

MAX9508.pdf Datasheet