Part # ATmega169P datasheet

Part Manufacturer: Atmel

Atmel

Part Description: ATmega169P


Part Details:

Features· High Performance, Low Power AVR® 8-Bit Microcontroller· Advanced RISC Architecture ­ 130 Powerful Instructions ­ Most Single Clock Cycle Execution­ 32 x 8 General Purpose Working Registers­ Fully Static Operation­ Up to 16 MIPS Throughput at 16 MHz­ On-Chip 2-cycle Multiplier · High Endurance Non-volatile Memory segments ­ 16K Bytes of In-System Self-programmable Flash program memory­ 512 Bytes EEPROM­ 1K Bytes Internal SRAM 8-bit ­ Write/Erase cycles: 10,000 Flash/100,000 EEPROM­ Data retention: 20 years at 85°C/100 years at 25°C(1) Microcontroller ­ Optional Boot Code Section with Independent Lock Bits In-System Programming by On-chip Boot ProgramTrue Read-While-Write Operation with 16K Bytes ­ Programming Lock for Software Security · JTAG (IEEE std. 1149.1 compliant) Interface In-System ­ Boundary-scan Capabilities According to the JTAG Standard­ Extensive On-chip Debug Support Programmable ­ Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface · Peripheral Features ­ 4 x 25 Segment LCD Driver Flash ­ Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode­ One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode ­ Real Time Counter with Separate Oscillator ATmega169P ­ Four PWM Channels­ 8-channel, 10-bit ADC­ Programmable Serial USART ATmega169PV ­ Master/Slave SPI Serial Interface­ Universal Serial Interface with Start Condition Detector­ Programmable Watchdog Timer with Separate On-chip Oscillator­ On-chip Analog Comparator­ Interrupt and Wake-up on Pin Change Preliminary · Special Microcontroller Features ­ Power-on Reset and Programmable Brown-out Detection­ Internal Calibrated Oscillator­ External and Internal Interrupt Sources­ Five Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, and Standby · I/O and Packages ­ 54 Programmable I/O Lines­ 64-lead TQFP, 64-pad QFN/MLF and 64-pad DRQFN · Speed Grade: ­ ATmega169PV: 0 - 4 MHz @ 1.8 - 5.5V, 0 - 8 MHz @ 2.7 - 5.5V­ ATmega169P: 0 - 8 MHz @ 2.7 - 5.5V, 0 - 16 MHz @ 4.5 - 5.5V · Temperature range: ­ -40°C to 85°C Industrial · Ultra-Low Power Consumption ­ Active Mode: 1 MHz, 1.8V: 330 µA32 kHz, 1.8V: 10 µA (including Oscillator)32 kHz, 1.8V: 25 µA (including Oscillator and LCD) ­ Power-down Mode: 0.1 µA at 1.8V ­ Power-save Mode: 0.6 µA at 1.8V(Including 32 kHz RTC) Rev. 8018L­AVR­08/08 ATmega169P 1. Pin Configurations 1.1 Pinout - TQFP/QFN/MLF Figure 1-1. 64A (TQFP)and 64M1 (QFN/MLF) Pinout ATmega169P AVCC GND AREF


Please click the following link to download the datasheet:

ATmega169P.pdf Datasheet