Part # MAX6457-MAX6460 datasheet

Part Manufacturer: Maxim


Part Description: MAX6457-60 DS

Part Details:

19-2534; Rev 3; 1/07 High-Voltage, Low-Current Voltage Monitors in SOT Packages MAX6457­MAX6460 General Description Features The MAX6457­MAX6460 high supply voltage, low-power Wide Supply Voltage Range, 4V to 28V voltage monitors operate over a 4V to 28V supply voltage range. Each device includes a precision bandgap refer- Internal 2.25V ±2.5% Reference ence, one or two low-offset voltage comparators, internal Low Current (3.5µA, typ at 12V) threshold hysteresis, power good or reset timeout Open-Drain N-Channel Output (28V Compliant) options, and one or two high-voltage open-drain outputs.Two external resistors (three for window detection) set the Internal Threshold Hysteresis Options trip threshold voltages. (0.5%, 5%, 8.3%) The MAX6457 is a single voltage monitor for undervoltage Two IN-to-OUT Timeout Period Options or overvoltage detection. A logic-based clear input either (50µs, 150ms) latches the output for overvoltage applications or allowsthe device to operate in transparent mode. The MAX6458 Internal Undervoltage Lockout includes two comparators (one overvoltage and one Immune to Short Voltage Transients undervoltage) for window detection and a single output toindicate if the monitored input is within an adjustable volt- Small SOT23 Packages age window. The MAX6459 includes dual overvoltage/ Few External Components undervoltage comparators with two independent com-parator outputs. Use the MAX6459 as a window com- Fully Specified from -40°C to +125°C parator with separate undervoltage and overvoltage Ordering Information outputs or as two independent, single voltage monitors.The MAX6460 includes a single comparator and an inter- PIN- PKG nal reference, and can also accept an external reference. PART TEMP RANGE PACKAGE CODE The inverting and noninverting inputs of the comparatorare externally accessible to support positive or negative MAX6457UKD_ _-T -40°C to +125°C 5 SOT23-5 U5-1 voltage monitors and to configure the device for active- MAX6458UKD_ _-T -40°C to +125°C 5 SOT23-5 U5-1 high or active-low output logic.

Please click the following link to download the datasheet:

MAX6457-MAX6460.pdf Datasheet