Part # STLD40D datasheet

Part Manufacturer: ST Microelectronics

ST Microelectronics

Part Description: White LED power supply for large display backlight


Part Details:

STLD40D White led power supply for large display backlight General Features s Inductor switches boost controller s PFM mode control s High efficiency over wide range of input voltage from 3.0V to 5.5V s Overvoltage protection with automatic restart QFN8 (3mm x 3mm) s Adjustable peak current limit s Enable pin with possibility of PWM dimming high as 37V and can drive up to 10 white LEDs in control series. The converter is a PFM (pulse frequency s Low shutdown current <1uA modulation) inductor switches and can work in s Small external component discontinuous (DCM) mode operation. A minimum OFF time of the embedded boost switch T s Good load and line regulation SW is fixed internally and allows limiting the switching s QFN 3mm x 3mm x 1mm 8 leads frequency. The output current capability is 20mA with an output voltage of 37V. Application The regulation is done by sensing the led current through the resistor R s White Led supply for LCD backlight LED. The device can be turned ON/OFF through the s Mobile phone logic enable signal pin EN. By applying a low s PDA and organizers frequency PWM signal the LEDs can be dimmed. s Any handsets powered form 3.0V to 5.5V The maximum peak inductor current can be programmed by connected a resistor RSET to the Description pin RSET. STLD40D is a boost converter that operates from 3.0V to 5.5V and can provide an output voltage as Order code Part number Package Comments STLD40DPMR


Please click the following link to download the datasheet:

STLD40D.pdf Datasheet