Part # MAX4655-MAX4658 datasheet

Part Manufacturer: Maxim


Part Description: MAX4655 58 DS

Part Details:

19-1984; Rev 4; 6/07 High-Current, 10, SPST, CMOS Analog Switches MAX4655­MAX4658 General Description Features Maxim s MAX4655­MAX4658 are medium-voltage High Continuous Current Handling CMOS analog switches with low on-resistance of 10 300mA (MAX4655/MAX4656) max, specifically designed to handle large switch cur- 150mA (MAX4657/MAX4658) rents. With a switch capability of up to 400mA peak cur- High Peak Current Handling rent and 300mA continuous current (MAX4655/ 400mA (MAX4655/MAX4656) MAX4656), and up to 300mA peak current and 150mA 300mA (MAX4657/MAX4658) continuous current (MAX4657/MAX4658), these partscan switch loads as low as 25. They can replace reed 10 (max) On-Resistance (±15V supplies) relays with a million times the speed and virtually unlim- VL Not Required ited number of lifetime cycles. Normal power consump- 1 (max) RON Flatness over Specified Signal tion is only 3mW, whether the switch is on or off. These Range parts are TTL/CMOS compatible and will switch anyvoltage within its power-supply range. Rail-to-Rail Signal Handling These are SPST (single-pole/single-throw) switches. +12V Single Supply or ±15V Dual Supply The MAX4655/MAX4657 are normally closed (NC), Operation while the MAX4656/MAX4658 are normally open (NO). Pin Compatible with DG417, DG418 The difference between the MAX4655/MAX4656 andthe MAX4657/MAX4658 is in the power dissipation of Ordering Information their packages. Refer to the Absolute Maximum Ratingsand the Electrical Characteristics. TOP PART TEMP RANGE PIN-PACKAGE MARK The MAX4655­MAX4658 power-supply range is from±4.5V to ±20V for dual-supply operation and +9V to MAX4655ETA -40°C to +85°C 8 TDFN-EP* AKT +40V for single-supply operation. These switches can MAX4655EUA -40°C to +85°C 8 µMAX AAAL operate from any combination of supplies, within a 40V MAX4655ESA -40°C to +85°C

Please click the following link to download the datasheet:

MAX4655-MAX4658.pdf Datasheet