Part # LM6132 datasheet

Part Manufacturer: National Semiconductor

National Semiconductor

Part Description: LM6132 LM6134 Dual and Quad Low Power 10 MHz Rail-to-Rail I O Operational Amplifiers

Part Details:

LM6132 November 2004 and LM6132/LM6134Dual and Quad Low Power 10 MHz Rail-to-Rail I/O LM6134 Operational AmplifiersGeneral Description Features The LM6132/34 provides new levels of speed vs. power (For 5V Supply, Typ Unless Noted) Dual performance in applications where low voltage supplies or n Rail-to-Rail input CMVR -0.25V to 5.25V power limitations previously made compromise necessary. n Rail-to-Rail output swing 0.01V to 4.99V With only 360 µA/amp supply current, the 10 MHz gain- n High gain-bandwidth, 10 MHz at 20 kHz bandwidth of this device supports new portable applications and n Slew rate 12 V/µs where higher power devices unacceptably drain battery life. n Low supply current 360 µA/Amp The LM6132/34 can be driven by voltages that exceed both n Wide supply range 2.7V to over 24V Quad, power supply rails, thus eliminating concerns over exceedingthe common-mode voltage range. The rail-to-rail output n CMRR 100 dB swing capability provides the maximum possible dynamic n Gain 100 dB with R = 10k L range at the output. This is particularly important when op- n PSRR 82 dB erating on low supply voltages. The LM6132/34 can also Low drive large capacitive loads without oscillating. Applications Operating on supplies from 2.7V to over 24V, the LM6132/34 n Battery operated instrumentation is excellent for a very wide range of applications, from bat- n Instrumentation Amplifiers Power tery operated systems with large bandwidth requirements to n Portable scanners high speed instrumentation. n Wireless communications n Flat panel display driver 10 Connection Diagrams MHz 8-Pin DIP/SO 14-Pin DIP/SO Rail-to-Rail I/O 01234901 Top View

Please click the following link to download the datasheet:

LM6132.pdf Datasheet