Part # STLVDS3487B datasheet

Part Manufacturer: ST Microelectronics

ST Microelectronics

Part Description: HIGH SPEED DIFFERENTIAL LINE DRIVERS


Part Details:

STLVDS3487 High speed differential line drivers Feature summary s Meets or exceeds the requirements of ansi TIA/EIA-644 standard s Low voltage differential signaling with typical output voltage of 350mV and a 100 load s Typical output voltage rise and fall times of 750ps (400Mbps) s Typical propagation delay times of 1.7ns TSSOP s Operates from a single 3.3V supply s Power dissipation 25mW typical per driver at 200MHz operations with a 3.3V supply rail. Any of the four s Driver at high impedance when disabled or with current mode drivers will deliver a minimum V differential output voltage magnitude of 247mV CC = 0V into a 100 load when enabled. s Pin compatible with the MC3487 and SN65LVD3487 The intended application of this device and signalling technique is for point-to-point baseband s Low voltage TTL (LVTTL) logic input levels data transmission over controlled impedance media approximately 100. The transmission Description media may be printed circuit board traces, backplanes or cables. The ultimate rate and The STLVDS3487 is a quad differential line distance of data transfer is dependent upon the drivers that implements the electrical attenuation characteristics of the media and noise characteristics of low voltage differential signaling coupling to the environment. (LVDS). This signaling technique lowers the output voltage levels of 5V differential standard The STLVDS3487 is characterized for operation levels (such as TIA/EIA-422B) to reduce the from -40°C to 85°C. power, increase the switching speeds and allows . Obsolete Product(s) - Obsolete Product(s) Order code Temperature Part number Package Comments Range STLVDS3487BTR -40 to 85 °C TSSOP16 (Tape & Reel) 2500 parts per reel


Please click the following link to download the datasheet:

STLVDS3487B.pdf Datasheet