Part # Brief STEVAL-IFD001V1 datasheet

Part Manufacturer: ST Microelectronics

ST Microelectronics

Part Description: Full USB dongle based on STR912


Part Details:

STEVAL-IFD001V1 Full USB dongle based on STR912 Data Brief Features 42x GPIOs 8x ADC 3x UARTs 2x SPI I2C CAN USB slave (full-speed) STEVAL-IFD001V1 Ethernet (STE100 or STE10) Description This board is a general-purpose development platform for all applications based on the STR912 ARM 9 core microcontroller. It can be also used as a UART-SPI-I2C-USB-CAN-ETHERNET bridge. The board can be extended with options of a MEMS, Flash memory and an LCD display. The MEMS (micro-electomechanical-system) extension enables the sensing of 2 or 3-axial motion (acceleration or vibration). Both analog and digital sensors are supported. The Flash extension allows up to 1 Gbyte of memory to be added to the application. This additional memory can be connected through a parallel interface and is accessible through a Flash memory driver on board. The LCD extension allows most popular LCD displays to be connected to the main board. For more information please refer to the document UM0282. October 2007 Rev 1 1/8 For further information contact your local STMicroelectronics sales office. www.st.com 8 Block diagram STEVAL-IFD001V1 1 Block diagram This board is based on STR912FW4xx which provides calculation power up to 90MIPS. Figure 1. STR9 dongle block diagram 3.3V Power ANALOG_CONNECTOR 1.8V 10 × GPIO JTAG 8 × Ain 2 × ExtINT 4 × Buttons 4 × LEDs DIGITAL_CONNECTOR 16 × GPIO I2C & SPI STR912FW4xx 2 × ExtINT EXTENDED_CONNECTOR 16 × GPIO 3 × UART & SPI 6 × ExtINT CAN CAN PHY ETHERNET USB 2/8 STEVAL-IFD001V1 Schematics 2 Schematics Figure 2.


Please click the following link to download the datasheet:

Brief STEVAL-IFD001V1.pdf Datasheet