Part # AD5762R datasheet

Part Manufacturer: Analog Devices

Analog Devices

Part Description: AD5762R (Rev. 0)


Part Details:

Complete Dual, 16-Bit, High Accuracy, Serial Input, Bipolar Voltage Output DAC AD5762R FEATURES GENERAL DESCRIPTION Complete dual, 16-bit digital-to-analog converter (DAC) The AD5762R is a dual, 16-bit, serial input, bipolar voltage output Programmable output range: ±10 V, ±10.2564 V, or ±10.5263 V DAC that operates from supply voltages of ±11.4 V to ±16.5 V. ±1 LSB maximum INL error, ±1 LSB maximum DNL error Nominal full-scale output range is ±10 V. The AD5762R provides Low noise: 60 nV/Hz integrated output amplifiers, reference buffers, and proprietary Settling time: 10 s maximum power-up/power-down control circuitry. The part also features Integrated reference buffers a digital I/O port, programmed via the serial interface, and an Internal reference: 10 ppm/°C maximum analog temperature sensor. The part incorporates digital offset On-chip die temperature sensor and gain adjust registers per channel. Output control during power-up/brownout The AD5762R is a high performance converter that provides Programmable short-circuit protection guaranteed monotonicity, integral nonlinearity (INL) of ±1 LSB, Simultaneous updating via LDAC low noise, and 10 s settling time. The AD5762R includes an Asynchronous CLR to zero code on-chip 5 V reference with a reference temperature coefficient Digital offset and gain adjust of 10 ppm/°C maximum. During power-up when the supply Logic output control pins voltages are changing, VOUTx is clamped to 0 V via a low DSP-/microcontroller-compatible serial interface impedance path. Temperature range: -40°C to +85°C iCMOS process technology The AD5764R is based on the iCMOS® technology platform, which is designed for analog systems designers within industrial/instru- APPLICATIONS mentation equipment OEMs who need high performance ICs at Industrial automation higher voltage levels. iCMOS enables the development of analog Open-loop/closed-loop servo control ICs capable of 30 V and operation at ±15 V supplies, while allowing Process control reductions in power consumption and package size, coupled with Data acquisition systems increased ac and dc performance. Automatic test equipment The AD5762R uses a serial interface that operates at clock rates Automotive test and measurement of up to 30 MHz and is compatible with DSP and microcontroller High accuracy instrumentation interface standards. Double buffering allows the simultaneous


Please click the following link to download the datasheet:

AD5762R.pdf Datasheet