Part # ATmega169 datasheet

Part Manufacturer: Atmel

Atmel

Part Description: ATmega169


Part Details:

Features· High Performance, Low Power AVR® 8-Bit Microcontroller· Advanced RISC Architecture ­ 130 Powerful Instructions ­ Most Single Clock Cycle Execution­ 32 x 8 General Purpose Working Registers­ Fully Static Operation­ Up to 16 MIPS Throughput at 16 MHz­ On-Chip 2-cycle Multiplier · Non-volatile Program and Data Memories ­ 16K bytes of In-System Self-Programmable Flash Endurance: 10,000 Write/Erase Cycles 8-bit ­ Optional Boot Code Section with Independent Lock Bits In-System Programming by On-chip Boot Program Microcontroller True Read-While-Write Operation ­ 512 bytes EEPROM with 16K Bytes Endurance: 100,000 Write/Erase Cycles ­ 1K byte Internal SRAM In-System ­ Programming Lock for Software Security · JTAG (IEEE std. 1149.1 compliant) Interface ­ Boundary-scan Capabilities According to the JTAG Standard Programmable ­ Extensive On-chip Debug Support­ Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface Flash · Peripheral Features ­ 4 x 25 Segment LCD Driver­ Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode­ One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture ATmega169V Mode ­ Real Time Counter with Separate Oscillator ATmega169 ­ Four PWM Channels­ 8-channel, 10-bit ADC­ Programmable Serial USART­ Master/Slave SPI Serial Interface­ Universal Serial Interface with Start Condition Detector­ Programmable Watchdog Timer with Separate On-chip Oscillator­ On-chip Analog Comparator­ Interrupt and Wake-up on Pin Change · Special Microcontroller Features ­ Power-on Reset and Programmable Brown-out Detection­ Internal Calibrated Oscillator­ External and Internal Interrupt Sources­ Five Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, and Standby · I/O and Packages ­ 53 Programmable I/O Lines­ 64-lead TQFP and 64-pad QFN/MLF · Speed Grade: ­ ATmega169V: 0 - 4 MHz @ 1.8 - 5.5V, 0 - 8 MHz @ 2.7 - 5.5V­ ATmega169: 0 - 8 MHz @ 2.7 - 5.5V, 0 - 16 MHz @ 4.5 - 5.5V Notice: · Temperature range: ­ -40°C to 85°C Industrial Not recommended in new · Ultra-Low Power Consumption designs. ­ Active Mode: 1 MHz, 1.8V: 350µA32 kHz, 1.8V: 20µA (including Oscillator)32 kHz, 1.8V: 40µA (including Oscillator and LCD) ­ Power-down Mode: 0.1µA at 1.8V 2514P­AVR­07/06 Pin Configurations Figure 1. Pinout ATmega169 AVCC GND AREF PF0 (ADC0) PF1 (ADC1) PF2 (ADC2)


Please click the following link to download the datasheet:

ATmega169.pdf Datasheet