Part # 74ACT574 datasheet

Part Manufacturer: ST Microelectronics

ST Microelectronics

Part Description: Octal D-type flip-flop with 3 state outputs (non inverted)


Part Details:

74ACT574 OCTAL D-TYPE FLIP-FLOP WITH 3 STATE OUTPUTS (NON INVERTED) s HIGH SPEED: fMAX = 270MHz (TYP.) at VCC = 5.0V s LOW POWER DISSIPATION:ICC = 4µA(MAX.) at TA=25°C s COMPATIBLE WITH TTL OUTPUTSVIH = 2V (MIN.), VIL = 0.8V (MAX.) s 50 TRANSMISSION LINE DRIVING DIP SOP TSSOP CAPABILITY s SYMMETRICAL OUTPUT IMPEDANCE:|IOH| = IOL = 24mA (MIN) ORDER CODES s BALANCED PROPAGATION DELAYS: PACKAGE TUBE T & R tPLH tPHL DIP 74ACT574B s OPERATING VOLTAGE RANGE:V SOP 74ACT574M 74ACT574MTR CC (OPR) = 4.5V to 5.5V TSSOP 74ACT574TTR s PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 574 s IMPROVED LATCH-UP IMMUNITY a normal logic state (high or low logic level) andwhile high level the outputs will be in a high DESCRIPTION impedance state. The 74ACT574 is an advanced high-speed CMOS The output control does not affect the internal OCTAL D-TYPE FLIP-FLOP with 3 STATE operation of flip-flops; that is, the old data can be OUTPUT NON INVERTING fabricated with retained or the new data can be entered even sub-micron silicon gate and double-layer metal while the outputs are off. wiring C2MOS technology. This device is designed to interface directly High These 8 bit D-Type Flip-Flop are controlled by a Speed CMOS systems with TTL and NMOS


Please click the following link to download the datasheet:

74ACT574.pdf Datasheet