Part # nical Note STM32F101C4 STM32F101C6 STM32F101C8 STM32F101CB STM32F101R4 STM32F101R6 STM32F101R8 STM32F101RB STM32F101T6 STM32F101 datasheet

Part Manufacturer: ST Microelectronics

ST Microelectronics

Part Description: STM32F10xxx Medium-density devices: upgrading your toolchain to V5.20 of IAR EWARM


Part Details:

TN0067 Technical note STM32F10xxx Medium-density devices: upgrading your toolchain to V5.20 of IAR EWARM Introduction The purpose of this technical note is to provide information on the upgrade to V5.20 of the IAR EWARM toolchain when using STM32F10xxx Medium-density devices. For the complete documentation about EWARM V5.20, please refer to the IAR website. IAR EWARM V5.20 In July 2008, IAR released a new revision of the Embedded Workbench for ARM (EWARM): V5.20. The previous version was V5.11. While running the tests with this new toolchain revision, STMicroelectronics and IAR found some incompatibility with revisions B and Z of the STM32F10xxx Medium-density devices. ST recommends to use the latest revision of the STM32F10xxx Medium-density, that is revision Y. Free samples of the revision Y of the STM32F10xxx Medium-density chip are available from the STM32 page on the ST website.To get free samples, go to http://www.st.com/mcu/inchtml-pages-stm32.html, then click on the desired device on the product portfolio view. The page will direct you to the product page. For instance, if you click on STM32F103RB, you will be redirected to http://www.st.com/mcu/devicedocs-STM32F103RB-110.html where you can find samples by clicking on the button. The free sampling process is explained at: http://www.st.com/stonline/domains/buy/samples/index.htm. If you are using an IAR starter kit or an ST evaluation board with revisions B and Z of the STM32F10xxx Medium-density devices and you wish to upgrade to revision Y, ST offers a free replacement with the latest IAR starter kit and ST evaluation board. Please contact your nearest ST sales office or distributor. July 2008 Rev 1 1/3 www.st.com Revision history TN0067 Revision history Table 1. Document revision history Date Revision Changes 15-Jul-2008 1 Initial release. 2/3 TN0067 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve theright to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at anytime, without notice. All ST products are sold pursuant to ST s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes noliability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of thisdocument refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party productsor services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of suchthird party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIEDWARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIEDWARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWSOF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOTRECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAININGAPPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVEGRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately voidany warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, anyliability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com


Please click the following link to download the datasheet:

nical Note STM32F101C4 STM32F101C6 STM32F101C8 STM32F101CB STM32F101R4 STM32F101R6 STM32F101R8 STM32F101RB STM32F101T6 STM32F101.pdf Datasheet