Part # User Manual ST7LITE49M STLED316S STMPE1208S STEVAL-IHI001V1 UM0557 datasheet

Part Manufacturer: ST Microelectronics

ST Microelectronics

Part Description: STEVAL-IHI001V1 demonstration board


Part Details:

UM0557 User manual STEVAL-IHI001V1 demonstration board Introduction The STEVAL-IHI001V1 is a demonstration board designed to simulate the user interface of a modern washing machine. From a hardware and software standpoint, the board is ideal to demonstrate the capability of the STLED316S serial interface 6-digit LED controller with key scan. The user interface features 53 LEDs, 8 keys, a buzzer and extra connectors to eventually connect a daughterboard featuring a capacitive sensing keyboard with buttons, wheel and slide. The demonstration board is controlled by a low-cost 8-bit ST7LITE49M microcontroller with I2C bus interface. Figure 1. STEVAL-IHI001V1 demonstration board August 2008 Rev 1 1/10 www.st.com Contents UM0557 Contents 1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Installation and plug-in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Main features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Wash programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 Brightness control and lamp test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 6 STEVAL-IHI002V1 daughter demonstration board . . . . . . . . . . . . . . . . . 8 7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2/10 UM0557 Safety instructions 1 Safety instructions Warning: The STEVAL-IHI001V1 demonstration board must be used in a suitable laboratory by qualified personnel only, familiar with the installation, use, and maintenance of electrical systems. Intended use The STEVAL-IHI001V1 demonstration board is a component designed for demonstration purposes only, and shall be used neither for domestic installation nor for industrial installation. The technical data as well as the information concerning the power supply and working conditions shall be taken from the documentation included in the package and strictly observed. Installation The installation of the STEVAL-IHI001V1 demonstration board shall be taken from the present user manual and strictly observed. The components must be protected against excessive strain. In particular, no components are to be bent, or isolating distances altered during transportation, handling or usage. The STEVAL-IHI001V1 demonstration board contains electrostatically-sensitive components that are prone to damage through improper use. Electrical components must not be mechanically damaged or destroyed (to avoid potential risks and health injury). Electrical connection Applicable national accident prevention rules must be followed when working on the power supply mains. The electrical installation shall be completed in accordance with the appropriate requirements (e.g. cross-sectional areas of conductors, fusing, PE connections). Board operation A system architecture which supplies power to the demonstration board shall be equipped with additional control and protective devices in accordance with the applicable safety requirements (e.g. compliance with technical equipment and accident prevention rules). 3/10 Document Outline Figure 1. STEVAL-IHI001V1 demonstration board


Please click the following link to download the datasheet:

User Manual ST7LITE49M STLED316S STMPE1208S STEVAL-IHI001V1 UM0557.pdf Datasheet