Part # MAX3814 datasheet

Part Manufacturer: Maxim


Part Description: MAX3814 DS

Part Details:

19-0813; Rev 1; 9/07 EVALUATION KIT AVAILABLE DVI/HDMI TMDS FR-4 and Cable Equalizer/Driver MAX3814 General Description Features The MAX3814 TMDS® EQ/driver IC compensates for Equalizes FR-4 Board Microstrip and Cable HF FR-4 and cable losses up to the DVITM/HDMITM transmit Losses Up to 15dB at 825MHz for Operation at connector and provides a fully compliant DVI/HDMI 0.25Gbps to 1.65Gbps TMDS output. The device can also be used in DVI/HDMIcable applications to extend reach and improve jitter Compatible with HDMI 1.3 margin of cable channels at the receive-side connector. Less Than 0.2UIP-P Residual Jitter at 1.65Gbps for The on-chip TMDS drivers operate at a standard cur- 0 to 15dB Channel Loss at 825MHz rent level for implementing a typical DVI/HDMI non-back-terminated transmitter, as well as a 50% higher Input Terminations: 50 (Each Side to VCC) ±10% current mode for using a 200 back termination resis- Output of Driver is a Fully DVI/HDMI TMDS- tor (nonmatching) to achieve a 10dB return loss. Compatible Cable Driver Typical DVI/HDMI output drivers contribute to reflectionproblems between the connector and a typical high- Output Amplitude: 1.05VP-P Differential impedance (open) DVI/HDMI Tx output. The selectable Enable Pin to Select Normal Operation or Power- output current (LEVEL pin) gives the option of partial Down Mode back termination (e.g., differentially connected 200) tomitigate the reflection problem effectively while keeping LEVEL Pin to Select Output Current for Use With common-mode offset to a minimum. or Without Back Termination The 4-channel implementation treats all channels identi- 32-Pin TQFP for Four Channels; Any Channel Can cally. To allow board layout flexibility for DVI and HDMI Be Either a TMDS Data or Clock Signal connectors, which have different channel order, theclock and data channels can be arbitrarily assigned. VCC = 3.3V; Signal Pins Have Absolute Max Ratings of 5.5V (for Fault Conditions) The MAX3814 operates from a 3.3V power supply,standard for DVI/HDMI applications, and is packagedin a 5mm x 5mm x 0.1mm, 32-pin TQFP package. Ordering Information PIN- PKG Applications PART TEMP RANGE PACKAGE CODE Laptop PC TMDS Equalizer and Driver MAX3814CHJ+ 0°C to +70°C

Please click the following link to download the datasheet:

MAX3814.pdf Datasheet