Part # M74HC534 datasheet

Part Manufacturer: ST Microelectronics

ST Microelectronics

Part Description: Octal D-type flip flop with 3 state output inverting

Part Details:

M74HC534 OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT INVERTING s HIGH SPEED: fMAX = 90MHz (TYP.) at VCC = 6V s LOW POWER DISSIPATION:ICC = 4µA(MAX.) at TA=25°C s HIGH NOISE IMMUNITY:VNIH = VNIL = 28 % VCC (MIN.) s SYMMETRICAL OUTPUT IMPEDANCE: DIP SOP TSSOP |IOH| = IOL = 6mA (MIN) s BALANCED PROPAGATION DELAYS:tPLH tPHL ORDER CODES s WIDE OPERATING VOLTAGE RANGE: PACKAGE TUBE T & R VCC (OPR) = 2V to 6V DIP M74HC534B1R s PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 534 SOP M74HC534M1R M74HC534RM13TR TSSOP M74HC534TTR DESCRIPTIONThe M74HC534 is an high speed CMOS OCTAL level) and while high level the outputs will be in a D-TYPE FLIP FLOP WITH 3-STATE OUTPUTS high impedance state. INVERTING fabricated with silicon gate C2MOS The output control does not affect the internal technology. operation of flip-flops; that is, the old data can be This 8 bit D-TYPE FLIP FLOP is controlled by a retained or the new data can be entered even clock input (CK) and an output enable input (OE). while the outputs are off. On the positive transition of the clock, the Q All inputs are equipped with protection circuits outputs will be set to the logic state that were against static discharge and transient excess setup at the D inputs. voltage. While the OE input is at low level, the eight outputswill be in a normal logic state (high or low logic PIN CONNECTION AND IEC LOGIC SYMBOLS

Please click the following link to download the datasheet:

M74HC534.pdf Datasheet