Part # MAX3657 datasheet

Part Manufacturer: Maxim

Maxim

Part Description: MAX3657 DS


Part Details:

19-2834; Rev 3; 11/05 155Mbps Low-Noise Transimpedance Amplifier MAX3657 General Description Features The MAX3657 is a transimpedance preamplifier for 14nARMS Input-Referred Noise receivers operating up to 155Mbps. The low noise, highgain, and low-power dissipation make it ideal for Class-B 54k Transimpedance Gain and Class-C passive optical networks (PONs). 130MHz (typ) Bandwidth The circuit features 14nA input-referred noise, 130MHz 2mA bandwidth, and 2mA input overload. Low jitter is P-P Input Current--0dBm Overload Capability achieved without external compensation capacitors. 76mW (typ) Power Dissipation Operating from a +3.3V supply, the MAX3657 con- 3.3V Single-Supply Operation sumes only 76mW power. An integrated filter resistorprovides positive bias for the photodiode. These fea- Average Photocurrent Monitor tures, combined with a small die size, allow easyassembly into a TO-46 header with a photodiode. TheMAX3657 includes an average photocurrent monitor. Ordering Information The MAX3657 has a typical optical sensitivity of -38dBm PART TEMP RANGE PIN-PACKAGE (0.9A/W), which exceeds the Class-C PON require-ments. Typical overload is 0dBm. The MAX3657 is avail- MAX3657ETC -40°C to +85°C 12 Thin QFN able in die form with both output polarities (MAX3657E/D MAX3657E/D -40°C to +85°C Die* and MAX3657BE/D.) The MAX3657 is also available in a MAX3657BE/D -40°C to +85°C Die* 12-pin, 3mm x 3mm thin QFN package. *Dice are designed to operate over a -40°C to +110°C junction Applications temperature (TJ) range, but are tested and guaranteed at TA =+25°C. Optical Receivers (Up to 155Mbps Operation) Passive Optical Networks (PONs) Pin Configuration appears at end of data sheet. SFP/SFF Transceivers BiDi Transceivers Typical Application Circuit 3.3V CVCC1 CVCC2 VCCZ VCC


Please click the following link to download the datasheet:

MAX3657.pdf Datasheet