Part # STLVDS385B datasheet

Part Manufacturer: ST Microelectronics

ST Microelectronics

Part Description: +3.3V PROGRAMMABLE LVDS TRANSMITTER 24-BIT FLAT PANEL DISPLAY (FPD) LINK-85MHZ


Part Details:

STLVDS385 +3.3V PROGRAMMABLE LVDS TRANSMITTER 24-BIT FLAT PANEL DISPLAY (FPD) LINK-85MHZ s 20 TO 85 MHz SHIFT CLOCK SUPPORT s BEST­IN­CLASS SET & HOLD TIMES ONTxINPUTs s Tx POWER CONSUMPTION <130 mW (typ)@85MHz GRAYSCALE s Tx POWER-DOWN MODE <200µW (max) s SUPPORTS VGA, SVGA, XGA aND SINGLE/DUAL PIXEL SXGA. s NARROW BUS REDUCES CABLE SIZE ANDCOST TSSOP56 s UP TO 2.38 Gbps THROUGHPUT s UP TO 297.5 Megabytes/sec BANDWIDTH s 345 mV (typ) SWING LVDS DEVICES FOR link. Every cycle of the transmit clock 28 bits of LOW EMI input data are sampled and transmitted. At a s PLL REQUIRES NO EXTERNAL transmit clock frequency of 85 MHz, 24 bits of COMPONENTS RGB data and 3 bits of LCD timing and control s COMPATIBLE WITH TIA/EIA -644 LVDS data (FPLINE, FPFRAME, DRDY) are transmitted STANDARD at a rate of 595 Mbps per LVDS data channel.Using a 85 MHz clock, the data throughput is DESCRIPTION 297.5 Mbytes/sec. The transmitter can be The STLVDS385 transmitter converts 28 bits of programmed for Rising edge strobe or Falling LVCMOS/LVTTL data into four LVDS (Low edge strobe through a dedicated pin. A Rising Voltage Differential Signaling) data streams. A edge or Falling edge strobe transmitter will inter phase-locked transmit clock is transmitted in operate with a Falling edge strobe Receiver parallel with the data streams over a fifth LVDS without any translation logic. ORDERING CODES Temperature Type


Please click the following link to download the datasheet:

STLVDS385B.pdf Datasheet