Part # FSTD3306 datasheet

Part Manufacturer: Fairchild Semiconductor

Fairchild Semiconductor

Part Description: - DS500480


Part Details:

FSTD3306 2-Bit Low-Power Bus Switch with Level Shifting August 2006 FSTD3306 2-Bit Low-Power Bus Switch with Level Shifting Features Description Typical 3 switch resistance at 5.0V V The FSTD3306 is a 2-bit ultra high-speed CMOS FET CC, VIN = 0V Level shift facilitates 5V to 3.3V interfacing bus switch with enhanced level-shifting circuitry and TTL-compatible active LOW control inputs. The low on Minimal propagation delay through the switch resistance of the switch allows inputs to be connected to Power down high impedance input/output outputs with minimal propagation delay and without Zero bounce in flow-through mode generating additional ground bounce noise. The device is organized as a 2-bit switch with independent bus- TTL compatible active LOW control inputs enable ( BE ) controls. When BE is LOW, the switch is Control inputs are over-voltage tolerant ON and Port A is connected to Port B. When BE is HIGH, the switch is OPEN and a high-impedance state exists between the two ports. Reduced voltage drive to the gate of the FET switch permits nominal level shifting of 5V to 3V through the switch. Control inputs tolerate voltages up to 5.5V independent of VCC. Ordering Information Operating Top Pb- Part Number Package Temperature Packing Method Mark Free Range FSTD3306MTCX FD3306 8-Lead Thin Shrink Small Outline Package Yes -40 to +85°C Tape & Reel (TSSOP), JEDEC MO-153, 4.4mm Wide FSTD3306MTC FD3306 8-Lead Thin Shrink Small Outline Package Yes -40 to +85°C Tube (TSSOP), JEDEC MO-153, 4.4mm Wide FSTD3306L8X TD 8-Lead MicroPakTM Yes -40 to +85°C 5000 units on Reel Logic Diagram


Please click the following link to download the datasheet:

FSTD3306.pdf Datasheet