Part # MAX8830 datasheet

Part Manufacturer: Maxim

Maxim

Part Description: MAX8830 DS


Part Details:

19-0782; Rev 1; 6/08 LED Light Management IC in 2.5mm x 2.5mm UCSP MAX8830 General Description Features The MAX8830 light management IC integrates a 400mA Step-Up DC-DC Converter (guaranteed) PWM DC-DC step-up converter, a 320mA 400mA Guaranteed Output Current white LED camera flash current sink, and four program- Over 90% Efficiency mable LED current sinks. The internal 1MHz step-up On-Chip FET and Synchronous Rectifier converter features an internal switching MOSFET andsynchronous rectifier to improve efficiency and minimize Fixed 1MHz PWM Switching external component count. The camera flash output cur- Small 2.2µH to 10µH Inductor rent and maximum timer is programmable through I2C. I2C-Programmable VOUT (3.8V to 5.2V and Off in Each LED current is individually regulated to a program- 16 Steps) mable level (from off to 10mA in 32 steps) and is com- Flash LED Current Sink pletely independent of each other. I2C-Programmable Flash Output Current (Off to An I2C interface controls individual on/off of all outputs, 320mA in 32 Steps) step-up output voltage setting, movie/flash current, I2C-Programmable Flash Maximum Timer (0.5s, flash timer duration settings, and individual LED current 1.0s, 1.5s, or 2.0s) sink settings. I2C-Programmable Movie Output Current (Off to The MAX8830 is available in a 16-bump UCSPTM pack- 160mA in 16 Steps) age (2.5mm x 2.5mm). Movie Enabled by I2C or Logic Input Applications Flash Enabled by Logic InputLow Dropout (75mV typ) Cell Phones and Smartphones Four LED Current Sinks PDAs and MP3 Players Individually I2C-Programmable Output Current Off to 10mA in 32 Steps Typical Operating Circuit Low LED Sink Current Dropout Voltage (30mV typ) 2.2H TO I2C Interface 10H PROGRAMMABLE Write Address (0x94), Read Address (0x95) OUTPUT Individual On/Off and LED Current Settings 3.8V TO 5.2V


Please click the following link to download the datasheet:

MAX8830.pdf Datasheet