Part # AD6411 datasheet

Part Manufacturer: Analog Devices

Analog Devices

Part Description: AD6411 Data Sheet


Part Details:

a DECT RF Transceiver AD6411 FEATURES FUNCTIONAL BLOCK DIAGRAM Fully Compliant with DECT SpecificationsSingle IC DECT RadioIntegrated UHF VCO (External Resonator)Integrated Synthesizer Supporting Extended Frequency Allocation PLL RX Built-In Supply Regulation DEMODULATOR DATA LNA Direct VCO Modulation for DECT Transmit Path RSSI PLL-Based Demodulator PLL PFD Use with Low Cost Plastic Packaged SAW Filters TXDATA Ultralow Power Design VCO Operates from +3.0 V to +5.5 V Battery PA CONTROL User-Selectable Power-Down Modes AD6411 INTERFACE Small 48-Lead LQFP Package APPLICATIONSDECT Cordless TelephonesDECT-Based Wireless Local Loop SystemsDECT-Based Wireless Data Systems DESCRIPTION The transmit path accepts baseband data, which is filtered and The AD6411 provides the complete transmit and receive RF applied to the VCO directly. The VCO operates at half the RF signal processing necessary to implement a digital wireless carrier frequency, and is doubled to avoid pulling due to leakage transceiver based on the Digital Enhanced Cordless Telecom- from the output. munications (DECT) standard. An on-chip PLL frequency synthesizer provides channel selec- The AD6411 s receive signal path consists of a mixer, IF ampli- tion. Operating modes are selected either through a serial bus or fiers and PLL demodulator. The low noise, high intercept mixer asynchronous control pins. This allows compatibility with most is a development of the doubly-balanced Gilbert-Cell type. It of the available DECT baseband controller ASICs. has a nominal ­16 dBm input-referred 1 dB compression point The AD6411 is packaged in a 48-lead LQFP. and a ­8 dBm input referred third-order intercept. The limiteramplifier provides sufficient gain to drive the PLL demodulator,which provides selectable analog or sliced outputs. The RSSIoutput provides a voltage proportional to the receive signalstrength. It measures nearly 100 dB IF signal strength rangewith 14 mV/dB gain scaling. REV. 0 Information furnished by Analog Devices is believed to be accurate andreliable. However, no responsibility is assumed by Analog Devices for itsuse, nor for any infringements of patents or other rights of third parties One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. which may result from its use. No license is granted by implication or Tel: 781/329-4700 World Wide Web Site: http://www.analog.com


Please click the following link to download the datasheet:

AD6411.pdf Datasheet