Part # MAX9132-MAX9135 datasheet

Part Manufacturer: Maxim

Maxim

Part Description: MAX9132-4-5 DS


Part Details:

19-4215; Rev 0; 7/08 Programmable, High-Speed, Multiple Input/Output LVDS Crossbar Switches MAX9132/MAX9134/MAX9135 General Description Features The MAX9132/MAX9134/MAX9135 high-speed, multi- Supports up to 840Mbps Data Rate at Each Port ple-port, low-voltage differential signaling (LVDS) cross-bar switches are specially designed for digital video Nonactivated Ports are in High-Impedance State and camera signal transmission. These switches have a for Easy Port Expansion wide bandwidth, supporting data rates up to 840Mbps.The MAX9132 has three input ports and two output Programmable Preemphasis on LVDS Outputs ports, the MAX9134 has three input ports and four out- Self Common-Mode Biasing on LVDS Inputs put ports, and the MAX9135 has four input ports andthree output ports. The digital video or camera signal Three Selectable Approaches for Switch Routing: can go through the switches from an input port to one I2C Interface or multiple output ports. LIN Interface The MAX9132/MAX9134/MAX9135 switch routing is Programmable Pins (MAX9134/MAX9135) programmable through either an I2C interface or aLocal Interconnect Network (LIN) serial interface. In > ±25kV ESD Protection addition, the MAX9134/MAX9135 provide pins to setswitch routing. These pins also set the initial conditions +3.3V Supply Voltage for the I2C mode. To generate more input or output -40°C to +105°C Operating Temperature Range ports, these switches can be connected in parallel or incascade. The MAX9132/MAX9134/MAX9135 operate from a Pin Configurations +3.3V supply and are specified over the -40°C to+105°C temperature range. The MAX9134/MAX9135 TOP VIEW + are available in a 32-pin (5mm x 5mm) TQFP package, PD 1 20 SCL/RXD while the MAX9132 is available in a 20-pin (6.5mm x DVDD 2 19 SDA/TXD 4.4mm) TSSOP package. The input/output port pins are DIN0+ 3 18 LVDSVDD rated up to ±25kV ESD for the ISO Air-Gap Discharge DIN0- 4 17 DOUT0+ Model, ±15kV ESD for the IEC Air-Gap Discharge DIN1+ 5


Please click the following link to download the datasheet:

MAX9132-MAX9135.pdf Datasheet