Part # Brief STEVAL-PCN001V1 datasheet

Part Manufacturer: ST Microelectronics

ST Microelectronics

Part Description: USB power switch demonstration board


Part Details:

STEVAL-PCN001V1 USB power switch demonstration board Data Brief Features Input parameters: ­ Load current: 100 mA, 500 mA, 1 A or 2 A. Larger loads can be applied by properly changing the load resistance (R37) ­ Input voltage: 4.4 V, 4.75 V, 5.0 V or 5.25 V ­ Under-voltage protection ­ Power switch: enable or disable option on the GUI to control the voltage on the enable pin of the power switch Output parameters: ­ PC executable software (USBPS_GUI) for use with the demonstration board ­ PC executable software (DFUGUI) for upgrading the firmware by USB using the STEVAL-PCN001V1 DFU feature software, as well as through switches present on ­ ST7 firmware (C source code) for the the board. LEDs are provided on the board to ST72F62 microcontroller indicate the various combinations of input voltage and load applied to the power switch. The board Description has an ICC connector to program the microcontroller Flash memory. An external 12 V The purpose of this board is to demonstrate the charge pump is also provided on the board to features and capabilities of the ST204x and allow the user to perform in-application ST205x USB power switches developed by programming (IAP) of the microcontroller STMicroelectronics, using a Windows®-based embedded Flash program memory. Any type of host software application and one of several USB real load (e.g. USB speakers) can be powered low-speed microcontrollers from ST acting as a from this board by plugging in the connector peripheral device. The host software and the ST7 present on the board source code provides a clear picture of the power switch capabilities. The USB communication between host and the device is done through a HID class based protocol developed specifically for demonstration board applications. The demonstration board incorporates a microcontroller, programmable voltage regulator, MOSFETS, switches and various resistive networks. The on-board regulator can be configured to supply various voltages by selecting appropriate resistance from the resistive network present at the adjust pin of the regulator. Different voltages and loads can be selected from the PC September 2008 Rev 1 1/4 For further information contact your local STMicroelectronics sales office. www.st.com 4 Board schematic STEVAL-PCN001V1 1 Board schematic Figure 1. Schematic diagram 3IN 8


Please click the following link to download the datasheet:

Brief STEVAL-PCN001V1.pdf Datasheet