Part # 74LCX374 datasheet

Part Manufacturer: ST Microelectronics

ST Microelectronics

Part Description: Octal D-type flip flop non-inverting (3-state) with 5V tolerant inputs and outputs


Part Details:

74LCX374 OCTAL D-TYPE FLIP FLOP NON-INVERTING (3-STATE) WITH 5V TOLERANT INPUTS AND OUTPUTS s 5V TOLERANT INPUTS AND OUTPUTS s HIGH SPEED:fMAX = 150 MHz (MIN.) at VCC = 3V s POWER DOWN PROTECTION ON INPUTS AND OUTPUTS s SYMMETRICAL OUTPUT IMPEDANCE:|I SOP TSSOP OH| = IOL = 24mA (MIN) at VCC = 3V s PCI BUS LEVELS GUARANTEED AT 24 mA s BALANCED PROPAGATION DELAYS: Table 1: Order Codes tPLH tPHL s OPERATING VOLTAGE RANGE: PACKAGE T & R VCC(OPR) = 2.0V to 3.6V (1.5V Data SOP 74LCX374MTR Retention) TSSOP 74LCX374TTR s PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 374 s LATCH-UP PERFORMANCE EXCEEDS outputs will be set to the logic state that were 500mA (JESD 17) setup at the D inputs. s ESD PERFORMANCE: While the (OE) input is low, the 8 outputs will be in HBM > 2000V (MIL STD 883 method 3015); a normal logic state (high or low logic level) and MM > 200V while high level the outputs will be in a highimpedance state. DESCRIPTION The Output control does not affect the internaloperation of flip flops; that is, the old data can be The 74LCX374 is a low voltage CMOS OCTAL retained or the new data can be entered even D-TYPE FLIP FLOP with 3 STATE OUTPUT while the outputs are off. NON-INVERTING fabricated with sub-micron It has same speed performance at 3.3V than 5V silicon gate and double-layer metal wiring C2MOS AC/ACT family, combined with a lower power


Please click the following link to download the datasheet:

74LCX374.pdf Datasheet